Changes to Step #16
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Hotend Cooling Fans |
|---|---|
| + | [* 10] The two 30mm fans on the DSH heatsink are connected directly to the power supply. |
| + | [* 10] Use scissors or side cutters to remove the two connectors and expose some wire. |
| + | [* 5] Twist the two red and black cables together as shown. |
| + | [* 10] Connect them directly to the power supply. |
| + | [* 3] Red to positive. |
| + | [* 6] Black to negative. |
Image 1
No previous image
Added
Image 2
No previous image
Added