Changes to Step #20
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Stepper Drivers |
|---|---|
| + | [* 9] Before beginning, make sure that you have earthed yourself (by touching a large metal object) to avoid the chances of static damage. |
| + | [* 5] Prepare the four TMC2209 stepper drivers by removing them from their packaging and securing onto them their heat sinks as shown in the first image. |
| + | [* 11] Make sure the heatsink is not touching any of the pins. |
| + | [* 11] Orient the fins of the heatsink as shown. |
| + | [* 4] Mount all four of the TMC2209 Stepper Drivers to the control board as shown. |
| + | [* 11] When installing, match the orientation of the drivers as shown, the green side of the stepper should go onto the red side of the mounts on the board. |
| + | [* 9] Installing a stepper driver the wrong way round will destroy it. |
Image 1
No previous image
Added
Image 2
No previous image
Added