Changes to Step #23
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Installing the Touch Screen |
|---|---|
| + | [* 10] Begin by removing the black control know from the front side of the screen, it should simply pull off. |
| + | [* 5] Align the touch screen with the case and drop it onto the four bolts. |
| + | [* 6] When you drop the touch screen into the case, you'll find that the control knob side will stick up. |
| + | [* 2] Thread on two M3 x 10mm threaded spacers to the two bolts on the left as shown. |
Image 1
No previous image
Added