Changes to Step #7
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Mounting the Z-Motors |
|---|---|
| + | [* 5] Mount the four NEMA-17 Motors to the base with M3 x 6mm cap head bolts. |
| + | [* 9] These motors are not the high speed LDO ones. |
| + | [* 7] Ensure that the cable connectors on the motors are all facing inwards under the base as shown. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added