Changes to Step #7
Edit by Chris —
Edit declined by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Mounting the Z-Motors | |
| - | [* 5] Mount the four NEMA-17 Motors to the base with M3 x 6mm cap head bolts. |
| + | [* 5] Mount the four NEMA-17 Motors to the base with M3 x 6mm cap head bolts. (These are the smaller ones) |
| [* 9] These motors are ***not*** the high speed LDO ones. | |
| [* 7] Ensure that the cable connectors on the motors are all facing inwards under the base as shown. |