Changes to Step #7

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Mounting the Z-Motors
[* 5] Mount the four NEMA-17 Motors to the base with M3 x 6mm cap head bolts.
- [* 9] These are the smaller BQ motors.
-[* 7] Ensure that the cable connectors on the motors are all facing inwards under the base as shown.
+ [* 9] ***These are the smaller BQ motors.***
+[* 6] Ensure that the cable connectors on the motors are all facing inwards under the base as shown.