Changes to Step #8
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] SSR Relay | |
| [* 10] Mount the SSR Relay to the base. | |
| [* 5] M4 x 12mm Button | |
| [* 7] M4 Nyloc | |
| [* 6] Mount the SSR with the load side terminals facing the rear of the base. | |
| + | [* 11] Bolt orientation is purely aesthetic, feel free to install the other way round (easier), with the nut on the top side of the base. |