Changes to Step #10
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Mounting the Electronics Fan |
|---|---|
| + | [* 10] Mount the 40mm fan as shown. |
| + | [* 9] Select the fan with the shorter (approx 20cm) cable. |
| + | [* 9] Install the fan with the sticker side facing into the base. |
| + | [* 5] M3 x 28mm Bolt |
| + | [* 7] M3 Nyloc Nut |
Image 1
No previous image
Added
Image 2
No previous image
Added