Changes to Step #10
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Mounting the Electronics Fan | |
| - | [* 10] Mount the 40mm fan as shown. |
| + | [* 10] Mount the 40mm fan as shown - orientate the cable so it points to the top of the base. |
| [* 9] Select the fan with the shorter (approx 20cm) cable. | |
| [* 9] Install the fan with the sticker side facing into the base. | |
| [* 5] M3 x 28mm Bolt | |
| [* 7] M3 Nyloc Nut |