Changes to Step #13
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Mounting the Pi Board |
|---|---|
| + | [* 9] Before unpacking the Pi control board make sure that you have grounded yourself. You can do this by touching a large metal object. This is to prevent any static from damaging the control board when handling it. |
| + | [* 10] Mount the board to the base: |
| + | [* 5] M2.5 x 6mm bolt |
| + | [* 7] M2.5 x 10mm standoff |
| + | [* 6] Mount the board with the USB ports pointing to the left as shown. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added