Changes to Step #13
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Mounting the Pi Board | |
| - | [* 9] Before unpacking the Pi control board make sure that you have grounded yourself. You can do this by touching a large metal object. This is to prevent any static from damaging the control board when handling it. |
| [* 10] Mount the board to the base: | |
| [* 5] M2.5 x 6mm bolt | |
| [* 7] M2.5 x 10mm standoff | |
| [* 6] Mount the board with the USB ports pointing to the left as shown. | |
| + | [* 11] Stick the antenna to the base. |