Changes to Step #12
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Preparing the BTT Pi |
|---|---|
| + | [* 9] Before unpacking the Pi control board make sure that you have grounded yourself. You can do this by touching a large metal object. This is to prevent any static from damaging the control board when handling it. |
| + | [* 7] Stick the heatsink on to the Pi board. |
| + | [* 2] Ensure that there is ***no jumper*** placed here - you may need to remove it. |
| + | [* 5] Connect the WiFi antenna to the back of the board. |
Image 1
No previous image
Added
Image 2
No previous image
Added