Changes to Step #21
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Mains Wiring |
|---|---|
| + | [* 4] Connect the switch to the mains power port. |
| + | [* 2] As shown in the diagram connect the cables from the mains power port to the: |
| + | [* 5] 24V Power Supply |
| + | [* 7] 48V Power Supply |
| + | [* 3] SSR Relay |
| + | [* 6] Fix the shortest earth cable to the base. Scuff the paint a little so that it is able to make contact with the metal. |
| + | [* 11] M4 x 12mm bolt and M4 Nyloc Nut |
Image 1
No previous image
Added
Image 2
No previous image
Added