Changes to Step #21
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Mains Wiring | |
| [* 4] Connect the switch to the mains power port. | |
| [* 2] As shown in the diagram connect the cables from the mains power port to the: | |
| [* 5] 24V Power Supply | |
| [* 7] 48V Power Supply | |
| [* 3] SSR Relay | |
| [* 6] Fix the shortest earth cable to the base. Scuff the paint a little so that it is able to make contact with the metal. | |
| - | [* 11] M4 x 12mm bolt and M4 Nyloc Nut |
| + | [* 11] M4 x 12mm button bolt and M4 Nyloc Nut |