Changes to Step #2
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Y - Motor and Endstop Cables |
|---|---|
| + | [* 5] Feed a 3-pin 1M Cable around the Y-Motor. |
| + | [* 3] Push the cable through the slot on the Z-Axis Bracket and connect the cable to the endstop. |
| + | [* 7] Connect a 4-pin 1M cable to the Y-Axis Motor. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added