Changes to Step #2

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Y - Motor and Endstop Cables
-[* 5] Feed a 3-pin 1M Cable around the Y-Motor.
+[* 5] Feed a 3-pin 1.5M Cable around the Y-Motor.
[* 3] Push the cable through the slot on the Z-Axis Bracket and connect the cable to the endstop.
-[* 7] Connect a 4-pin 1M cable to the Y-Axis Motor.
+[* 7] Connect a 4-pin 1.5M cable to the Y-Axis Motor.