Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Cable Tying
+[* light_blue] Move the Gantry down to its lowest position.
+[* green] Arrange the Cables from the extruder assembly to stretch down to the Z-Axis Bracket.
+[* blue] Securely cable tie all of the cables to the Z-Axis Bracket.
+ [* icon_caution] Make sure that the endstop cable is taught against the Y-Motor and not rubbing against the roller wheel as shown in the third image.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added