Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Hotend Fan
[* icon_note] Connect the Hotend fan directly to the power supply.
[* red] Red cable to positive.
[* black] Black cable to negative.
-[* icon_reminder] You can cut the cable down for a better fit but remember to leave some spare if you plan on installing the Dual Switching Extruder Upgrade.
+[* icon_reminder] You can cut the cable down for a better fit but remember to leave some spare if you plan on later upgrading to the Dual Switching Extruder.