Changes to Step #25
Edit by Bruce Segal —
Edit approved by Makertech
- Before
- After
- Unchanged
Step Lines
| [title] Stepper Drivers | |
| [* icon_caution] ***See next step for Proforge 2S.*** | |
| [* green] Prepare four of the A4988 Stepper Drivers by removing them from their packaging and sticking the heatsink to the black chip. | |
| [* icon_note] Make sure the heatsink is not touching any of the pins. | |
| - | [* icon_note] |
| + | [* icon_note] Orient the fins of the heatsink as shown. |
| [* icon_note] The kit includes a fifth A4988 Stepper driver as a spare. | |
| [* blue] Fix the four Stepper Drivers onto the the control board as shown in the X, Y, Z and E0 positions. | |
| [* icon_caution] Make sure that the screw trimpot is pointing towards the touch screen. |