Changes to Step #26
Step Lines
| + | [title] Stepper Drivers - Proforge 2S |
|---|---|
| + | [* green] Prepare two of the A4988 Stepper Drivers by removing them from their packaging and sticking the heatsink to the black chip. |
| + | [* icon_note] Make sure the heatsink is not touching any of the pins. |
| + | [* icon_note] Orientate the fins of the heatsink as shown. |
| + | [* icon_note] The Kit will have 5 A4988 Stepper dirvers in total, for the Proforge 2S you will only need to use two, the remaining are spares. |
| + | [* blue] Fix the two Stepper Drivers onto the the control board as shown in the Z and E0 positions. |
| + | [* icon_caution] Make sure that the screw trimpot is pointing towards the touch screen. |
Image 1
No previous image
Added
Image 2
No previous image
Added