Changes to this Step
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Stepper Drivers - Proforge 2S Cont. |
|---|---|
| + | [* 5] Prepare the two TMC2100 Stepper Drivers by removing them from their packaging and sticking the heatsink to the golden heat wells on the PCB as shown. |
| + | [* 10] Make sure the heatsink is not touching any of the pins. |
| + | [* 10] Orientate the fins of the heatsink as shown. |
| + | [* 6] Fix the TMC2100 Stepper Driver onto the Stepper Noise Filter. |
| + | [* 9] Orientate as shown in the third image. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added