Changes to Step #9

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Hotend Wiring Cont.
-[* 5] Cable ties together the Hotend heater and thermistor cables.
+[* 5] Cable tie together the Hotend heater and thermistor cables.
[* 6] Loop and cable tie the excess cable.
[* 11] Keep the cable ties a short distance in from the ends so as not to create any sharp bends in the cables.
[* 4] Tuck the cables in between the side panel and power supply.