Changes to Step #11
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Door Hinges |
|---|---|
| + | [* 1] Fix two hinges onto each door panel as shown. The hinges should be installed on the front side of the panel. |
| + | [* 8] Hinge |
| + | [* 7] M4 x 10mm Bolt |
| + | [* 3] M4 x 8mm Bolt |
| + | [* 2] M4 Nyloc Nut |
| + | [* 6] M4 T-nut |
| + | [* 11] Fasten these on loosely. |
Image 1
No previous image
Added
Image 2
No previous image
Added