Changes to Step #24
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Roof Hinges |
|---|---|
| + | [* 10] Add to the rear of the assembly two hinges. |
| + | [* 8] Hinge |
| + | [* 7] M4 x 10mm Bolt |
| + | [* 3] M4 x 8mm Bolt |
| + | [* 2] M4 Nyloc Nut |
| + | [* 6] M4 T-nut |
| + | [* 11] Loosely fasten on the T-nuts |
Image 2
Old Version
New Version