Changes to Step #8
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Tool Carraige Kit |
|---|---|
| + | [* 2] Tool Carrraige |
| + | [* 8] Rollers and Bearing Set (x4) |
| + | [* 3] GT2 Belt |
| + | [* 7] M5 Eccentric Spacer (x2) |
| + | [* 5] M5 x 6mm Spacer (x2) |
| + | [* 1] Fasteners: - M5 x 25mm Bolts (x5) - M5 Nyloc Nuts (x5) - M5 Washer (x5) - M4 x 10mm Bolt (x2) - M4 Nyloc Nuts (x2) |
Image 1
No previous image
Added