Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Preparing the Tool Carraige |
|---|---|
| + | [* 10] The DSH requires four M3 mounting holes, 31mm apart from each other. |
| + | [* 10] If your printers gantry is a piece of 2020 aluminium extrusion you may be able to use the Proforge 2S tool carriage, available for separate purchase [https://www.makertech3d.com/products/tool-carriage-and-belt-kit|here]. |