Changes to Step #11
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Heater Block Assembly |
|---|---|
| + | [* 3] Fix onto both the heater blocks, the heatbreak. |
| + | [* 2] and nozzle. |
| + | [* 10] Leave a slight gap between the nozzle and heater block when tightening. The nozzle will need to be tightened again when hot. |
Image 1
No previous image
Added
Image 2
No previous image
Added