Changes to Step #4
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Thermistor Tables |
|---|---|
| + | [* 8] Configure the thermistors. For the low temperature thermistor (white cable) select 561. For the high temp thermistor (blue cable) select 562. |
| + | [* 10] Make sure to also download both of these temp profiles and place them into your Marlin thermistors folder. Marlin/src/module/thermistor |
| + | [* 10] The download is available at the very bottom of this guide. |
Image 1
No previous image
Added