Changes to Step #4

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Thermistor Tables
[* 8] Configure the thermistors. For the low temperature thermistor (white cable) select 561. For the high temp thermistor (blue cable) select 562.
[* 10] Make sure to also download both of these temp profiles and place them into your Marlin thermistors folder. Marlin/src/module/thermistor
- [* 10] The download is available at the very bottom of this guide.
+ [* 10] The download is available [link|https://github.com/Makertech3D/Dual-Switching-Hotend-v2|here].