Changes to Step #4
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Thermistors | |
| [* 10] Set the thermistors: | |
| [* 4] Low temp (white cable) - set as 1 | |
| - | [* 7] High temp (blue cable) - set as 560 |
| - | [* 11] If you are running two high temp thermistors, both need to be set to 560. |
| - | [* 9] If you have the T-D500 thermistor from triangle labs set this to 66. |
| + | [* 7] High temp (blue or white cable) - set as 66 |
| + | [* 9] Ignore 560 in the image. |