Changes to Step #4
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Thermistors | |
| - | [* 10] Set the thermistors: |
| + | [* 10] Set the thermistors (OLD): |
| [* 4] Low temp (white cable) - set as 1 | |
| [* 7] High temp (blue or white cable) - set as 66 | |
| - | [* 9] Ignore 560 in the image. |
| + | [* 9] Ignore 560 in the image. |
| + | [* 10] NEW 2024 Thermistor: |
| + | [* 11] As of 2024, both sides are high temp 300C sides with the same type of thermistor. If you received your kit in 2024 then set the thermistor value to 5 |