Changes to Step #2
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Load the Model into CURA |
|---|---|
| + | [* 2] Load the included ''DSH Calibration Model'' model into CURA. |
| + | [* 11] There are two files, you will need to load both. |
| + | [* 5] Align the models so that the arrows are in the direction of the axes. |
| + | [* 7] Right click on this part of the model and choose*** Hotend #2.*** |