Changes to Step #11

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Inspecting and Calibrating the Print
-[* 10] The two parts of the Calibration Print will likely be either over-lapping each other or be leaving a gap.
-[* 10] Depending on how the print looks we will adjust the X/Y offsets in Cura with the aim of getting the two parts to line up.
+[* 10] The calibration print should self align. The DSH is CNC machined to a high degree of precision. If you find gaps or overlaps in your print, we recommend first investigating that everything is OK mechanically.
+[* 10] If everything is mechanically OK, then we will adjust the X/Y offsets in Cura with the aim of getting the two parts to line up.
[* 2] Offsets are entered in Machine Settings under the ***Hotend #2*** Tab.