Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Rubber Feet | |
| [* 7] Attach the four rubber feet to the corners of the Base. | |
| [* 2] M4 x 16mm Button | |
| [* 5] M4 Nyloc Nut | |
| [* 10] Photographed are 3D printed feet, however the ones included are injection moulded rubber. | |
| + | [* 11] The Feet are silicone rubber, pliers will be needed to help hold the nyloc nuts in place whilst fastening. |