Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Rubber Feet | |
| [* 7] Attach the four rubber feet to the corners of the Base. | |
| [* 2] M4 x 16mm Button | |
| [* 5] M4 Nyloc Nut | |
| [* 10] Photographed are 3D printed feet, however the ones included are injection moulded rubber. | |
| - | [* 11] The Feet are silicone rubber, pliers will be needed to help hold the nyloc nuts in place whilst fastening. |
| + | [* 11] The Feet are silicone rubber, pliers will be needed to help hold the nyloc nuts in place whilst fastening. This was an unfortunate oversight, and one we weren't able to correct due to the cost of tooling for these injection moulded parts. |