Changes to Step #4
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Control Board |
|---|---|
| + | [* 10] Fix four stand offs to the base: |
| + | [* 6] M3 x 10mm threaded stand-off |
| + | [* 3] M3 x 6mm Button |
| + | [* 9] Before removing the control board from it's packaging, make sure that you are earthed, you can do this by toughing a large metal object. This is to ensure a static shock doesn't damage the board. |
| + | [* 3] Fix the board onto the mounts with four M3 x 6mm button head bolts. |
| + | [* 11] Make sure the board is orientated as shown. |
| + | [* 5] Plug the electronics fan into the control board as shown. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added