Changes to Step #4

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Control Board
-[* 10] Fix four stand offs to the base:
+[* 10] Fix four stand-offs to the base:
[* 6] M3 x 10mm threaded stand-off
[* 3] M3 x 6mm Button
-[* 9] Before removing the control board from it's packaging, make sure that you are earthed, you can do this by toughing a large metal object. This is to ensure a static shock doesn't damage the board.
+[* 9] Before removing the control board from it's packaging, make sure that you are earthed, you can do this by touching a large metal object. This is to ensure a static shock doesn't damage the board.
[* 3] Fix the board onto the mounts with four M3 x 6mm button head bolts.
[* 11] Make sure the board is orientated as shown.
[* 5] Plug the electronics fan into the control board as shown.