Changes to Step #6
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Power Socket | |
| [* 5] Push the switch side of the assembly in through the rectangular cut-out at the back of the base. | |
| [* 10] Push the socket in and and secure it in place with: | |
| [* 6] M3 x 10mm Cap | |
| [* 3] M3 Nyloc | |
| + | [* 9] Again, match the orientation of the socket as shown in the second image. |