Changes to Step #11
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Control Board Power Cables |
|---|---|
| + | [* 5] Secure the black and red power cables to the control board as shown. |
| + | [* 6] On the power supply side, the red cable goes to positive and the black to negative. |
| + | [* 9] Double check that all the cables are connected correctly, as shown in the images. Incorrectly connecting the cables can cause irreversible damage. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added