Changes to Step #12
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Z-Axis Motors |
|---|---|
| + | [* 5] Fix the two 1.8 degree NEMA 17 motors to the base. |
| + | [* 3] M3 x 6mm Cap Head Bolt |
| + | [* 8] Make sure that the cable header, on the motor, is facing inwards. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added