Changes to Step #12
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Z-Axis Motors | |
| + | [* 9] If building the Proforge 3.5, skip this step. |
| [* 5] Fix the two 1.8 degree NEMA 17 motors to the base. Serial No. 42BYGH438. | |
| [* 3] M3 x 6mm Cap Head Bolt | |
| [* 9] Make sure that the cable header, on the motor, is facing inwards. |