Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Kit Contents |
|---|---|
| + | [* icon_note] Check that you have all of the following: |
| + | [* black] 3D Printed Parts (x4) |
| + | [* black] Rails (x4) |
| + | [* black] Fastener pack |
| + | [* black] 5x8 Coupling |
| + | [* black] M4 Threaded Inserts (x11) |
| + | [* icon_note] You will also need (not included): |
| + | [* black] Allen keys, Drill with metal bits (2mm/3mm), Pliers, Soldering Iron (for threaded inserts) |