Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Kit Contents | |
| [* 10] Check that you have all of the following: | |
| [* 1] 3D Printed Parts (x4) | |
| [* 1] Rails (x4) | |
| [* 1] Fastener pack | |
| [* 1] 5x8 Coupling | |
| [* 1] M4 Threaded Inserts (x11) | |
| [* 10] You will also need (not included): | |
| - | [* 1] Allen keys, Drill with metal bits (2mm/3mm), Pliers, Soldering Iron (for threaded inserts) |
| + | [* 1] Allen keys, Drill with metal bits (2mm/3mm), Side Cutters, Pliers, Soldering Iron (for threaded inserts) |