Changes to Step #2
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Dissassembling the Platform |
|---|---|
| + | [* 1] Begin by disassembling the platform from the base. |
| + | [* 1] Do this by first untying the belt from the platform. |
| + | [* 1] Then remove the heated bed and place it to one side, you don't need to disconnect its wiring. |
| + | [* 1] Finally, remove the old HDPE linear guides holding the platform in place. |