Changes to Step #4
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Disassembling the Z-Pillar |
|---|---|
| + | [* 1] If you have an extruder installed on the vertical pillar, remove it now. |
| + | [* 1] Next, unfasten the bolts connecting the pillar to the support bracket at the top of the pillar. |
| + | [* 1] Remove the the motor bolts at the bottom of the pillar. |
| + | [* 1] The pillar should now come free. |