Changes to Step #6
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Gantry Rail |
|---|---|
| + | [* 5] Use a 3mm bit to drill three holes into the gantry. |
| + | [* 2] The rail should be fitted 5mm from the top edge of the gantry. |
| + | [* 5] Secure with M3 x 12mm Cap and M3 Nyloc Nut |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added