Changes to Step #7
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Z-Pillar Rail |
|---|---|
| + | [* 5] Align the thicker 15mm rail to the centre of the pillar and create marks for three holes. |
| + | [* 5] Drill three 3mm holes into the pillar. |
| + | [* 5] Secure the rail with three M3 x 12mm cap bolts and M3 nyloc nuts. |
| + | [* 10] Re-install the z-pillar when done. |
Image 1
No previous image
Added