Changes to Step #9
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Intalling the Platform |
|---|---|
| + | [* 5] Begin by installing the two 3D printed parts to the Base with two M4 x 6mm Bolts. |
| + | [* 10] Next line up the linear rail carriages on the platform with the holes on the 3d printed brackets. |
| + | [* 7] Secure the platform to the brackets using M2 x 6mm cap bolts. |
| + | [* 3] Double check you have the correct orientation, the heated bed cable relief mount should be in the top left. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added