Changes to Step #10
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Mounting the Heated Bed |
|---|---|
| + | [* 11] A heated bed is required for this upgrade to properly work. |
| + | [* 5] The heated bed needs to be raised 5mm before it can be installed. To do this we replace the 10mm stand-offs with 15mm ones. |
| + | [* 7] With the 15mm stand-offs installed, re-mount the heated bed. |
Image 1
No previous image
Added
Image 2
No previous image
Added