Changes to Step #11
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Platform Belt and Pi Cam |
|---|---|
| + | [* 2] Re-install the belt by first wrapping it around the pulley on the motor and then feeding it in through the rear bracket and around the bearings. |
| + | [* 11] You will need to use a pen to guide the belt around the bearings. |
| + | [* 7] Secure the belt to the bolts on the ends of the platform. |
| + | [* 5] Re-attach the Pi-cam if you have that upgrade. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added